LG FRIDGE Owner's Manual page 165

6. Procedure to install
19. Move the integrated door panel in or out to
adjust the depth gap to 4mm (See Figure
14), and fix the depth adjusting bracket
both sides (two spots) of the refrigerator door
with the door screw
20. Use the wood screws
door panel in or out to adjust the depth gap to 4mm (See Figure 14, Figure 17), and secure
the loosely fixed bracket screw
21. Place the top bracket cover
cover and
. (Figure 16)
(four spots) to the depth adjusting bracket
(Figure 1) to fix the depth adjusting bracket
on the door top and place the depth adjusting bracket
on the middle and the bottom of the door respectively. (See Figure 18)
to
, move the integrated
.