Table of Contents
Advertisement
Power Connections (continued)
This DVD player and its automotive adapter are designed for use in vehicles that have 12 volt, negative ground
Automotive
electrical systems. (This is standard for most vehicles.) If your vehicle has a different type of electrical system, the
Adapter
DC power system cannot be used.
Follow steps 1 to 2 to connect.
When disconnecting, reverse the order.
Caution
• To prevent electrical shock and possible damage to your DVD player or
vehicle, always unplug the automotive adapter from the cigarette lighter
socket before you remove the plug from your DVD player.
• A 3 amp. 250V fuse for protection is installed in the automotive adapter.
• While the engine is being started, disconnect the automotive adapter
from the car's cigarette lighter socket.
• Do not operate your DVD player when the car battery is discharged. Peak
current from the car generator may cause the DC fuse to blow.
• If the vehicle's supply voltage drops below approximately 10 volts, your
DVD player may not work properly.
• Do not leave your DVD player in a place where the temperature exceeds
70°C (158°F), or the pick-up device may be damaged.
Examples include:
- Inside a car with the windows closed and in direct sunshine.
- Near a heating appliance.
Cigarette lighter socket
1
To the DC inlet
Automotive adapter
• This automotive adapter operates on DC 12V.
• MODEL NO. : DPDC1
• Manufactured by WANLIDA Digital Technology Co., Ltd.
• Contact an electrical parts distributor for assistance in selecting
a suitable automotive adapter.
13
2
To the Automotive
adapter outlet
Advertisement
Table of Contents
