Enter Key (C7); Cancel Key (B6); Data Control Assign Key (C 6); Panic Key (F 6) - Williams Rhapsody Owner's Manual

enter key (c7)

When entering data in Edit Mode, pressing the Enter
key will cause the selected data to be sent to this
piano as a MIDI command. After pressing the Enter
key, the Rhapsody will return to Performance Mode.
cancel key (b  6)
Pressing the Cancel key at any time while in Edit
Mode will exit Edit Mode and return the Rhapsody to
Performance Mode. Settings will remain unchanged.
Data control assign key (c
Pressing the [DATA CONTROL] Assign key while in
Edit Mode will allow you to send MIDI Continuous
Controller command values using the Data
Control knob.
To assign the [DATA CONTROL] knob to send MIDI
Continuous Controller command values:
Press the [FUNCTION] button to enter Edit Mode.
FUNCTION
20
Press the [DATA CONTROL] Assign key (C#6).
Using the Numeric Data Entry keys, select the
Continuous Controller number you wish to assign
to the [DATA CONTROL] knob.
Press the ENTER key (C7).
The Rhapsody is now back in Performance Mode and
[DATA CONTROL] knob may be used to send values
for the Continuous Controller (CC) number assigned
to the [DATA CONTROL] knob.
6)
#
panic key (f
Pressing the Panic key will send out "Reset All
Controllers" and "All Notes Off " MIDI messages on
ALL MIDI Channels (1 – 16). This can be especially
useful for clearing "stuck notes" when controlling
external MIDI devices or software.
To send the messages, press the [FUNCTION] button
to enter Edit Mode.
Press the Panic Key (F#6).
# 6)