How To Operate The Controls - Hamilton Beach 840135100 Use & Care Manual

840135100 Ev03.qxd 2/9/05
How to Assemble and Lock the Cover

How to Operate the Controls

10:00 AM Page 5
Align cover as illustrated by placing
thumb on cover tab and twisting cover
clockwise. Four visual alignment markers
are provided (see illustration), one on
bowl, one on handle and two on bowl lid.
NOTE: The food processor will not
work unless the cover is locked into
position.
Food chute lid hinges onto back of
food chute. Push down lid to latch onto
food chute.
Before removing lid, switch to OFF (O)
position and wait until blade stops
rotating.
To remove food chute lid for cleaning,
place one hand in food pusher opening
and the other on food chute. Rotate
hand from left to right and lift up. This
will disengage left notch from slot and
then right notch from slot. Reverse the
directions to place food chute lid
back on food chute.
The control dial is conveniently located
on the front of the base. Rotate the
knob clockwise to select a speed:
The processor will run continuously.
For instant on and off control, use the
PULSE (P) button by rotating knob
counterclockwise. The blue dial around
the control knob will illuminate when
bowl, lid and food chute lid are all
securely locked in place. This indicates
that the unit is ready to be used.
1 and 2 for Low
3 and 4 for High
5