Kenmore 79049283000 Installation Instructions Manual page 3

Electrical connection Model and Serial Number Location
IMPORTANT Please read carefully. The serial plate is located as shown below.
For personal safety, this appliance must be properly
grounded.
The power cord of this appliance is equipped with a
3=prong (grounding) plug which mates with a standard
3=prong grounding wall receptacle to minimize the
possibility of electric shock hazard from the appliance.
When ordering parts for or making inquiries about your
Warm & Serve Drawer, always be sure to include the
model and serial numbers and a lot number or letter
from the serial plate.
The wall receptacle and circuit should be checked by
a qualified electrician to make sure the receptacle is
properly grounded.
Where a standard 2-prong wall receptacle is installed,
it is the personal responsibility and obligation of the
consumer to have it replaced by a properly grounded
3=prong wall receptacle.
Do not, under any circumstances, cut or remove the third
(ground) prong from the power cord.
Disconnect electrical supply cord from
wall receptacle before servicing cooktop.
Preferred Method
Grounding type
wall rece
Do not, under ony
clrcums|oncesv cut_
remove_ or bypass
the grounding
prong.
Cooktop
Cutout
Comblnofion Worm & Serve Drawer
and Cooktop Instollo|ion
........... ...Wormo
Drawer
Cutout
Power supply cord with
3=prong grounding plug.
You can install the warmer drawer in combination
with an electric or gas cooktop. You must follow the
specifications from the installation instructions of the
cooktop to avoid interference with the gas or electric
installation.