Coleman AMERICAN HERITAGE WEATHERMASTER 2000000148 Instructions

When You Are Ready
To Set Up Your Tent
– Select a level campsite clear
of rocks, branches and other
hard or sharp objects.
– Do not set up your tent
under trees.
– For best results in windy
conditions, position the end
of tent into the wind.
1 Layout & Positioning of Tent
– Layout and position tent with door
facing desired direction. (illus. 1)
– Stake down tent, starting with
the corners. Do not stretch
too tight. Angle the stakes
slightly toward the tent.
(illus. 2) Keep the floor taught.
– Unzip the door.
2
Assemble & Place Roof Poles
– Assemble all shock-corded
roof poles. When assembled will
form a continuous arch with both
ends pointing down. (illus. 3)
– Insert the curved ridge roof pole
through center roof pole sleeve.
(illus. 4)
– Insert the curved End roof poles
through end roof pole sleeves.
(illus. 4)
AMERICAN HERITAGE
WEATHERMASTER
Instructions apply to Part Number 2000000148
POLE ASSEMBLY PARTS
(2) Center Adjustable Upright Poles
(Red Sticker) Part No.
(4) Rear Adjustable Brace Poles
(Green Sticker) Part No.
(1) Center Curved Roof Poles
(Red Sticker)
(2) Rear Curved Roof Poles
(Green Sticker)
Vertical Hinged Door Pole
Rainfly Part No. 5010000478
illus. 1
®
5010000477
5010000476
Part No. 5010000474
Part No. 5010000475
Part No. 5010000512
Hinged Door Pole
Part No. 5010000513
Roof sleeve
Front door
illus. 3
illus. 4
Curved roof pole system shown
inserted through pole sleeves. (3 total)
™
CABIN 12'X9'
illus. 2
Stake loops
properly staked
Forms an arch
Shock-corded poles
Curved roof pole assembly.
Pole sleeves