Advertisement
How to Operate the Controls
Off
Low
On
Pulse/Momentary
Processing Chart
ATTACHMENT
Slicer disc
(slicing blade facing up)
S-Blade
Shredder disc
(shredding teeth facing up)
Operating time will depend on quantity of food being processed. Most foods can
be sliced, chopped, or shredded seconds. Do not operate processor for more
than 1 minute at a time. If processing large quantities, let processor rest about
1 minute before continuing.
The control panel provides quick-
reference graphics which indicate the
correct blade or disc for a job:
Speed Switch: Move the speed switch
to either LOW ( • ) or HIGH ( •• ) speed
before turning on the motor with the
Control Switch.
Control Switch: The three-position
Control Switch gives you a choice of
High
ON ( l ), OFF ( O ), or PULSE/MOMEN-
TARY
. Selecting the ON ( l ) position
will cause the motor to run continuously
until you move the switch to OFF ( O ).
The PULSE/MOMENTARY
will cause the motor to run only until
you release the switch; then it automat-
ically springs back to the OFF ( O )
position.
SPEED
•
Low (
)
Cucumbers, apples, mushrooms
••
High (
)
Julienne vegetables
•
Low (
)
Chop nuts, mince vegetables
••
High (
)
Chop meat, puree food
Low (
•
)
Cabbage
••
High (
)
Firm cheeses
position
FOODS
7
Advertisement
