Table of Contents
Advertisement
4. Press the SeT button to apply changes.
The startup image will still be displayed when you turn on your camera even if the
Note
selected image was deleted.
DPof
The Digital Print Order Format (DPOF) function allows you to mark image in your memory
card for printing and allows you to specify the number of copies that you want to print at
a later date.
When all images to be printed are marked, take the memory card to a digital printing service,
or use a DPOF compatible printer.
To set DPOF:
1. Press the MenU button to launch the Playback menu.
2. Select DPof. The submenu appears.
Available settings are as follows:
•
Single. Select a single image to mark.
•
All. Mark all images in the memory card.
Reset. Reset all DPOF settings to initial default settings.
•
To set DPOF on a single image/all images:
1. Select Single or All on the DPOF submenu.
2. For single image, use the
and select an image to mark for printing.
3. Specify the number of copies. Use the
increase/decrease number.
4. Press the fUnC button to toggle between turning
on/off the date stamp.
5. Press the SeT button to save DPOF settings.
To reset DPOF:
1. Select Reset on the DPOF submenu.
A confirmation message appears.
2. Select yes.
3. Press the SeT button to reset DPOF settings.
You can specify up to 99 copies for DPOF.
Note
If you specify 0 copies, the DPOF setting
of that image is automatically disabled.
PICTbRIDGe
The PictBridge function allows you to print images
captured by your camera without connecting the
camera to a PC. Print images with a PictBridge
compatible printer directly.
To activate PictBridge:
Connect your camera to a PictBridge compatible printer
using the USB cable. See illustration to the right.
If the printer does not support date stamp, the date
Note
stamp function will be disabled in PictBridge.
or
keys to scroll
or
to
37
Trim
Resize
Startup Image
Single
DPOF
All
Reset
DPOF
Copies
00
00
Date stamp off
Reset DPOF?
Yes
Cancel
Advertisement
Table of Contents
