Table of Contents
Advertisement
To activate Intelligent Scene:
1.
Select
from the Scene Mode submenu.
2.
Focus the camera on the subject to capture.
3.
The camera detects the shooting conditions and
switches to an appropriate scene mode.
4.
Half press the shutter button to focus the subject.
The frame turns green to indicate focus is set.
5.
Press the shutter button to take the shot.
When Intelligent Scene function is enabled,
Note
icons will be displayed even in Guideline,
Non-display modes and when the shutter
button is half pressed.
The table below shows the modes supported by Intelligent Scene:
intelligent
icon
scene moDes
portrait
landscape
sunset
macro
Backlight
Backlight portrait
night scene
night portrait
USInG bLInk DeTeCTIon MoDe
The Blink Detection mode tracks faces and
determines if a captured image contains subjects
with closed eyes. After shooting, when the camera
detects that the subject blinked an eye, a menu
selection appears to ask the user whether to save
the image or not. This feature saves time in managing
photos to be stored or deleted from the memory.
Description
This mode is set when a face is detected.
This mode is set when:
• There is no face detected.
• The focus distance is more than 1.5 meters.
• The EV setting is greater than 11 or 10.5.
This mode is set when sunset lighting is detected.
This mode is set when:
• There is no face detected.
• The focus distance is within the macro range.
This mode can only be detected when you half press
the shutter button.
This mode is set when the EV setting is greater than 2.5.
This mode is set when a face is detected with an EV
setting greater than 2.5.
This mode is set when:
• There is no face detected.
• The focus distance is more than 1.5 meters.
• The EV setting is lower than 5 or 4.5.
This mode is set when a face is detected
with an EV setting lower than 5 or 4.5.
21
10M
10M
307
307
307
307
Advertisement
Table of Contents
