Table of Contents
Advertisement
4. Cut food to fit food chute. Pack food
chute tightly with food. Insert food
pusher in chute. Always use the
food pusher to feed food into the
chute. NEVER PUSH FOOD
THROUGH CHUTE WITH HANDS.
5. Plug in unit and process food.
How to Operate the Controls
Pulse/Momentary
The control panel provides quick-
reference graphics which indicate
the correct blade or disc for a job:
Speed Switch: Push the switch to
either Low (•) or High (••) speed
before turning on the motor with the
control switch.
6. Select speed. While pressing on
food pusher, push ON ( l ) or
PULSE
7. When food chute is empty, push
OFF ( O ) or release from PULSE
position. Wait until blade has
stopped rotating before removing
cover.
OFF
Low
ON
Control Switch: This switch gives you
three choices: ON ( l ), OFF ( O ) or
PULSE/MOMENTARY
Selecting the ON ( l ) position will
cause the motor to run continuously
until you push the switch to OFF ( O ).
The PULSE/MOMENTARY
will cause the motor to run only until
you release the switch; then it auto-
matically springs back to the OFF ( O)
position.
to process food.
High
.
position
7
Advertisement
Table of Contents
