Charging Your Device; Syncing The Keyboard - Brookstone Bluetooth Tablet Station Instruction Manual

chaRGInG YoUR DevIce

1 . Connect the Adapter to the Adapter Port on the stand and then to an electrical outlet .
2 . Plug your device' s USB charging cord (supplied with your device) into the USB
Charging Port on the stand, and then into your device, to charge .

sYncInG The KeYboaRD

1 . Power on your device .
2 . Slide the On/Off switch on the Keyboard to "on" . Both the Bluetooth LED and
the power LED illuminators will light up for a few seconds and then shut off .
3 . Press the Connect button on the Keyboard . The Power LED will illuminate and
the Bluetooth LED will flash .
4 . Select the "Settings" icon on your device' s screen .
5 . Locate and select "Bluetooth" in your device's "General" menu .
6 . Under "Devices" on your device, select the "Brookstone Tablet Station . "
7 . Your device will now prompt you to enter your computer' s Bluetooth password
and press either the Return or Enter key, using the Tablet Stand' s keyboard .
8 . Your device' s screen should now show the Tablet Stand has
connected successfully .
9 . The Power LED will remain illuminated while the keyboard is powered on .
10 . Slide the On/Off switch to "off" when you are done using the keyboard .
11