Sony SVT1121 How To Use Manual page 147

operation, your VAIO computer automatically turns off.
Removing Recovery Content to Free up Disk Space
Your built-in storage device contains the recovery area where the data for system recovery is
stored. If your VAIO computer includes a solid state drive (SSD), you might want to minimize
the recovery area by removing such data to free up disk space on the C: drive (or the last
drive in your drive list, for example D: drive).
You need Recovery Media to remove the data for system recovery or to recover the computer
after you remove the data.
Note that removing recovery content makes it impossible to use the refresh function.
If you use Recovery Media (optical discs) on the model without a built-in optical disc drive,
connect an external optical disc drive (not supplied) to the computer. See
External Drive for more information on how to connect the external optical disc drive.
If an AC adapter or a power cable is supplied, plug it into a power source.
1. Create Recovery Media if you have not yet created it.
See Creating Recovery Media
2. Insert the Recovery Media into the optical disc drive or connect a USB flash drive (not
supplied) to the USB port on your VAIO computer while the computer is in Normal mode.
3. Turn off your VAIO computer.
4. Press the ASSIST button to display the VAIO Care (Rescue Mode) screen and select
Start from media (USB device/optical disc).
Follow the on-screen instructions until the Choose an option screen appears.
5. Select Troubleshoot and VAIO recovery solutions.
Follow the on-screen instructions until the VAIO Care (Rescue Mode): VAIO recovery
solutions screen appears.
6. Select Tools and Remove recovery partition.
7. Follow the on-screen instructions.
Recovering from Recovery Media
If the recovery area data has been corrupted or erased, you can use Recovery Media to recover
your VAIO computer.
However, recovering the computer using the Recovery Media will take longer than using the
recovery area.
If you use Recovery Media (optical discs) on the model without a built-in optical disc drive,
connect an external optical disc drive (not supplied) to the computer. See
for more information on how to create Recovery Media.
Connecting an
Connecting an