Quick Cleaning - Hamilton Beach 50754C User Manual

840131900 ENv01.qxd
Speed Control Panels
8
S
PEED
OFF
I
CE
B
REAKER
OFF
First select and push a LO or HI power
button then push desired speed button.
When using PULSE or Ice Breaker
tons, blender will operate only as long as
button is pushed. The remaining speed
buttons will run the blender until OFF is
pushed.

Quick Cleaning

Quick cleaning should only be used to
rinse the blender between batches of
processing the same food. When the
processing of a single type of food is
finished, the blender should be disas-
sembled and thoroughly cleaned as
instructed in "How to Clean."
To quick clean, pour 2 cups (500 ml)
warm water in jar and add 1 drop liquid
dishwashing detergent. Run the blender
on I D for 10 seconds. Flush soapy
CY RINK
water through dispenser until cleaned.
2/22/05 10:40 AM Page 5
™ but-
Both Pulse 1 and Pulse 2 may be used
on HI and LO speed settings. For the
highest speed, push HI and Pulse 2.
Discard soapy water. Rinse blender jar
with clean water. Flush clean water
through dispenser until cleaned.
This function is not a substitute for
regular cleaning as instructed in "How
to Clean." This function should never
be used when blending any mixture
containing eggs, milk, or any other
dairy products, meats, or seafood.
Pulse
5