Parts And Features - Hamilton Beach 50754C User Manual

840131900 ENv01.qxd
Do not place blender jar in the freezer
filled with food or liquid. This will freeze
and can result in damage to the cutting
blades, jar, blender and possibly result in
personal injury.

Parts and Features

1. Filler Cap
2. Lid
3. Blender Jar
4. Thermal Jar
(for Thermal Jar models
only)
5. Gasket
6. Dispenser
(also see inset below)
7. Base
8. Dispenser Lever
9. Speed Control Panel
10. Cutting Assembly
11. Dispenser Cover
12. Spout
13. Actuator
14. Interior Plug
15. Spout Cap
2/22/05 10:40 AM Page 3
NOTICE: To prevent leakage of liquids from
your blender jar, the round rubber gasket
must be properly placed between jar and
cutting assembly as shown in the diagram
below.
Thermal Jar
Models Only
Before First Use: After unpacking
blender, wash everything except
blender base in hot, soapy water.
Dry thoroughly. Wipe blender base
with a damp cloth or sponge. DO
NOT IMMERSE BASE IN WATER.
Care should be taken when han-
dling the cutting assembly as the
blades are very sharp.
3