Advertisement
CONTROL PANEL
PENETRATION
DECREASE
SENSITIVITY
MIN
MAX
INCREASE
R
Sensitivity
This control turns the M-101 On & Off. It also permits
a wide range of sensitivity to metal targets. MAXimum
position is normally used in the initial scanning and
locating operation. MINimum or reduced sensitivity is
used to help pinpoint metal objects.
Penetration
Controls the depth of penetration. This knob is free
spinning and does not have stops in either direction.
Meter
Gives a visual display of signal strength and Battery Test
Battery Test
Used to test the condition of the batteries in the M-101.
Battery Access
The M-101 is powered by two 9 volt batteries. Access to
the batteries is on the back of the detector.
M - 1 0 1
B
A
T
T
E
Y
HEAD
T
E
S
T
PHONES
3
Advertisement
