Fisher ID EXCEL Operating Manual

Fisher ID EXCEL Operating Manual

Target i.d. metal detector
Hide thumbs Also See for ID EXCEL:

Advertisement

Quick Links

QUALITY
ID Excel
Fisher detectors are renowned for their quality.
Each instrument is hand crafted in the USA with pride
Target I.D. Metal Detector
PERFORMANCE
Our detectors are durable, dependable, and search deeper.
REPUTATION
Fisher produced the first patented metal detector in 1931. For
over 70 years, the Fisher logo has been a mark of excellence.
5-YEAR LIMITED WARRANTY
Fisher believes in the products we produce and backs this belief with
a 5-Year Limited Warranty. Warranty may vary outside the United
States. See your dealer for details
SERVICE
Fisher is committed to providing you, our valued customer, with
superior service. Each and every instrument is rigidly tested
& carefully inspected during assembly and before shipment.
Should you have any questions or problems, contact:
FISHER RESEARCH LABORATORY
200 West Willmott Road.,
Los Banos, California 93635
Tel 209.826.3292 Fax 209.826.0416
www.fisherlab.com email: info@fisherlab.com
Operating Manual
F I S H E R
R E S E A R C H
L A B O R A T O R Y
FRL#8730020 -D
IDexcel-Manual-8730020 .indd 1
6/13/06 3:11:17 PM

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ID EXCEL and is the answer not in the manual?

Questions and answers

Summary of Contents for Fisher ID EXCEL

  • Page 1 Our detectors are durable, dependable, and search deeper. REPUTATION Fisher produced the first patented metal detector in 1931. For over 70 years, the Fisher logo has been a mark of excellence. 5-YEAR LIMITED WARRANTY Fisher believes in the products we produce and backs this belief with a 5-Year Limited Warranty.
  • Page 2: Specifications

    1. Subject to improvement or modification without notice. 2. Approximate. 3. The ID Excel disassembles to fit into an optional carrying case measuring approximately 6"x 21" x 15". 4. The ID Excel is a motion detector in the All Metal and Target ID modes.
  • Page 3: About Your Detector

    MAINTENANCE ABOUT YOUR DETECTOR Your ID Excel doesn’t require a lot of care. It’s built with high-quality materials. But there are a few things you should do to keep it in peak operating condition. Your ID Excel is the hottest digital technology on 1.
  • Page 4: Battery Replacement

    BATTERY REPLACEMENT SETTING UP Your Fisher ID Excel is built to last for years. Handle it carefully, care Battery replacement is simple with the ID Excel drop-in battery for it regularly, and it will give you years of dependable service.
  • Page 5 Unlike other metal detectors, the discrimination settings have little if any effect on the depth capability of the ID Excel. Depth is also determined by the size, shape and conductivity of the target as well as the sensitivity setting of the ID Excel.
  • Page 6: Additional Features

    AUTOMATIC LOW BATTERY WARNING: The ID Excel will let The ID Excel control panel is an all new digital I/O System. The LCD you know when a low battery condition will begin to effect Display provides you with a constant control readout showing you performance —...
  • Page 7: Auto Ground Balance

    AUTO button and hold it for about 2 seconds. Then, while still holding the AUTO button down, lift the coil about 6 inches off the ground, hold for a second, and release the button. The ID Excel will give you a brief tone to let you know the ground balance has been achieved.
  • Page 8: Factory Preset Mode

    Fisher recommends that for a quick start setup and while you are pinpoint mode is activated. This pinpoint mode may be familiar in learning to hunt with your ID Excel that you use the factory preset some ways (when the target is approached, the audio intensity mode.

This manual is also suitable for:

M-scope id excel

Table of Contents