Singer Quantum Decor User Manual page 10

Machine Set- - - - Up: Machine Set Machine Set Machine Set Up: Up: Up:
Stitch:
Stitch Width:
Stitch Length:
Presser Foot:
Materials: Materials: Materials: Materials:
Home décor fabric with interfacing or tear-away stabilizer
Disappearing marking pen or tailor chalk (for marking size of buttonhole)
Button (to establish length of buttonhole)
Procedure: Procedure: Procedure: Procedure:
Fold fabric in half crosswise, with interfacing or stabilizer between layers.
Lay button on fabric and mark the top and bottom of the button.
This will establish the starting and ending points of the buttonhole.
Push the foot's white movable piece to the most forward red line on
the foot.
Place the fabric under the foot, matching the foot's red mark with the
bottom mark on the fabric.
Sew 5 to 6 stitches of Step One (which is the lower/bottom bartack)
Cut open buttonhole and use a seam sealant to reinforce the buttonhole.
Note: To adjust the density or if the sides are uneven, refer to the manual
for adjustment instructions.
Bartack Buttonholes
Step One of the Four-Step Buttonhole
5-7
Buttonhole symbol
Buttonhole Foot (after attaching, push the moveable
white part to most rear position)
8