Connectivity Overview - Hercules ePlug 200 Mini Manual

Hercules ePlug 200 Mini

1.6. Connectivity overview

In order for the Hercules ePlug 200 Mini adapter to switch to standby mode, the network card
on your computer or other network device must be inactive (i.e. no data is being transferred).
To be sure that the network card remains inactive, you can unplug the computer from its
electrical outlet, particularly if you don't intend to use it again for some time, or, if the computer
is plugged into a power strip with an On/Off button, you can press the Off button on the power
strip.
6/59 – User Manual
 Power plug to plug the Hercules ePlug 200 Mini adapter
into an electrical outlet
 Ethernet port allowing you to connect a device to the
Hercules ePlug 200 Mini adapter (desktop computer, laptop or
netbook computer, game console, TV decoder, modem/router,
Internet "box")
 Pairing button with three functions, allowing you to:
- enable pairing, in order to connect other ePlug 200
adapters to the network (by way of a short press,
from 2 to 4 seconds): the power LED flashes
- randomly generate a new network password (by
way of a medium press, from 8 to 12 seconds): the
adapter restarts when you release the button
- restore factory default settings (by way of a long
press, of more than 15 seconds): the adapter
restarts