Advertisement
Usage
After installation, as there's no water inside the tank, please be sure to open
the water inlet valve and any of water exit. When the tank is filled with water
and the water exit keeps discharging water, close the valve. Check if there's
water leakage at each joint. Plug the power plug. In usage, be sure to open
the cold water valve before the hot water valve to avoid scalding .You can
t
urn the handle of the mixing valve upward to the left then pull the handle of
the safety valve to discharge the water
Switch on the power. The heating indicator is on. The water heater starts
operating. When the water temperature reaches 60 , the heating indicator is
off. The water heater will stop heating and enters heat preservation mode.
If the water temperature drops to certain degree, the red indicator will light on
again to continue heating. It will circulate like that to guarantee the continuous
hot water supply.
Attention
This product requires power supply with 220V , 50Hz.
The max heating temperature is 60 , not drinkable.
Reliable earthing is requested. Earthing wire shall be separated from neutral
wire strictly. T
o avoid accident,
the positions of the live wire and earthing
wire can not be replaced.(See to Figure 5.)
Earthing wire
Earthing wire
Live wire
Live wire
Neutral wire
.
Live wire
Earthing wire
(Figure 5)
Live wire
Earthing wire
Neutral wire
5
Before Usage
Dear users,
¡Â
Thanks for choosing Haier water heater product.
Haier products have good quality and excellent performance. To facilitate
you to use the product, please read the manual and operate accordingly.
Please retain it for future reference.
The international star service of Haier Group will always accompany you.
No matter what kind of problems you meet in usage, please contact with the
local after -sales service agent. We are at your service all the time. Thanks
again for choosing Haier Product.
The water heater you purchased may not fully comply with the figure in
the manual due to the improvement of product. We apologize for the
inconvenience occurred therefrom.
Features
1.Safely:
Hai-quality heat proof stainless steel electric heating element, safe and
Reliable; overtemperature protection; overpressure protection of tank;
2. Durability:
Full plastic shell, elegant and durable;
Enamel tank, with more reliable quality and longer operation life.
3. Multi- usage:
Enclosed structure, capable of supplying multiple places;
Suitable for family , enterprise, catering, beauty service etc. on hot water
Supply.
4. Nice molding, space-saving
Arc appearance, appealing design, dapper and elegant.
5. Convenience:
60
thermostatic heating. It will stop heating when the temperature
Reaches 60
.
Parameters
Rated voltage:220V~50Hz
Power: 1200W
Rated pressure: 0.75MPa
Waterproof grade: antisplash(
)
Dimension(See to Figure 1)
Weight: (See to Figure 1)
Volume: (See to Figure 1)
Tap water pressure: no less than 0.05MPa
2
Advertisement
