Secure Dishwasher In Cabinet Opening - Whirlpool GU3200XTXB4 Installation Instructions Manual

Wi r i ng c o nf ig ur at io n*_::
Power Supply wire: Terminal box wire:
If needed, see website for animated representation
of this step. Visit www.whMpool.eom/eleetrieal under
FAQ tab.
Tighten strain relief screws to secure cable.
Place wires inside terminal box. Insert tabs on left side
of cover. Make sure wires are tucked inside box. Close
cover ensuring wires are not pinched. Use 1/4" nut driver
and previously removed screw to secure cover.
Secure Dishwasher in Cabinet
Opening
Check that dishwasher is still level front-to-back and
side-to-side in cabinet opening,
Open dishwasher door, remove lower dish rack, and
place towel over pump assembly and lower spray arm of
dishwasher. This will prohibit screws from falling into
pump area when securing dishwasher to countertop.
NOTE: Do not drop screws into bottom of dishwasher.
Locate brackets on top of dishwasher and secure
dishwasher to countertop with two, #10 x 1/2"Phillips-head
screws (included). The dishwasher must be secured to
keep it from shifting when door is opened.
19