Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Fine Digital CR-2i Full HD
Summary of Contents for Fine Digital CR-2i Full HD
- Page 1 User Manual...
- Page 2 Thank you for choosing the Finevu Car black box. Before using the product, please read this manual carefully. Finedigital has an on-going policy of upgrading its products and it may be possible that information in this document is not up-to-date. Please visit the Finevu website (www.finevu.com) for current updates and the latest information.
-
Page 3: Table Of Contents
Contents Memory management ......22 Warning ............4 Safety and Memory map ..........23 Caution ............5 Settings Precautions Connecting the black box to a PC ..24 Features ............6 Setup program ..........25 Components - front ........7 Alarms and Status alarms ..........28 Components - rear ........ -
Page 4: Warning
Safety and Precautions WARNING Breaching the following precautions may result in serious personal injury or even death. • Plug the USB and video cables in properly. Failure to do so Power may result in fire or product failure. • Do not use a damaged or modified power cable. Doing so may cause explosion or fire, and may result in personal injury or damage to the vehicle. -
Page 5: Caution
CR-2i Full HD user manual CAUTION Breaching the following precautions may result in personal injury or property damage. Installation Management • • Do not connect the uninterrupted power supply Do not leave the product or its accessories within reach arbitrarily. It may result in vehicular or product failure. -
Page 6: Features
Features Clear video quality Easy installation • • 16:9 widescreen and HD video recording Always recording in the correct direction by automatically • CMOS sensor with 1920x1080 effective pixels changing the image orientation no matter where it is • High resolution, 107° horizontal wide angle camera lens installed (Front camera only) •... -
Page 7: Components - Front
Components and names Components - front Double-sided tape for the Mount installation of the mount GPS (optional) Front camera Clips for arranging cables Cigarette jack cord (USB) ※ The components of this product are subject to change without notice in order to improve its performance. -
Page 8: Components - Rear
Components - rear Rear camera connection cable Rear camera Components - PC connection USB SD card reader (optional) Micro SDHC card adapter USB cable micro SDHC card ※ The components of this product are subject to change without notice in order to improve its performance. -
Page 9: Optional Accessories
CR-2i Full HD user manual Optional Accessories USB SD card reader Power adapter External USB battery pack Note All accessories are available from the store where you purchased the product. -
Page 10: Names - Front Camera
Features Names - front camera Rear connection port Ventilation hole Connect to a rear camera. Dissipates heat generated by (Video and power in/out) the product. USB port Speaker Use to supply power (DC 5V) or Alerts you to the operating connect to a PC. -
Page 11: Names - Rear Camera
CR-2i Full HD user manual Names - rear camera Attachment type holder Fix the camera location. Fastener Rear camera lens After adjusting the camera angle, Record video from the rear. turn it clockwise to fix it. Rear connection port Connect to a front camera.(Video... -
Page 12: Finding An Installation Location For A Front Camera
Installation Finding an installation location for a front camera Inserting a micro SDHC card • We recommend that the product is installed on the front windshield, either to the left or the right of the rear view mirror, and in a position that doesn't prevent you from adjusting the position of the mirror. -
Page 13: Installation - Front
CR-2i Full HD user manual Installation - front Attach the black box to the mount Install the mounting bracket in the vehicle using the double -sided tape Use a cigar jack cord to Install a GPS device (optional) connect to... -
Page 14: Installation - Rear
Installation Installation - rear Connect a rear camera Using the double-sided connection cable to the tape, attach rear camera mounting bracket to the rear glass Adjust the rear camera angle Connect the front Hold the rear camera camera to connection the rear cable in camera... -
Page 15: Recording Voice
Using the product Using a PC, you can play and check files that are recorded according to the driving or parking of your car and the default settings of the black box. Recording voice Note color indicates that the LED is blinking. LED Buttons Mode Description... - Page 16 Using the product Recording while driving LED Buttons Mode Description When booting is complete, the Normal Recording mode starts. Blue Normal recording The recorded video is stored in the normal folder on the memory card. A rear camera is not connected. Green The Normal Recording mode switches to the Shock Recording mode when a shock is detected.
- Page 17 CR-2i Full HD user manual Recording while parking LED Buttons Mode Description If there is no movement of the vehicle for 10 minutes, the mode automatically changes to the Parking mode. Parking Purple When the vehicle starts, it will be automatically switched to the Normal Recording mode.
- Page 18 Using the product Recording with external USB power (5V external battery) LED Buttons Mode Description Booting White Booting is completed within 15 seconds of power-up. If the external power is supplied to the black box through the USB port, booting will be complete and then the black box will switch to the Normal Recording mode.
-
Page 19: Viewing Recorded Videos
CR-2i Full HD user manual Viewing recorded videos Viewing on PC (connecting the black box) When you click 'Open folder to view files using Windows Connect the black box to the PC with the USB cable. Explorer' , the folders containing videos and pictures will appear. - Page 20 Using the product Viewing on PC (memory card) When you click 'Open folder to view files using Windows Remove the micro SDHC card from the black box and Explorer' , the folders containing videos and pictures will insert it into the micro SD adapter. Use the memory card reader for connection with a PC.
-
Page 21: Finevu Player
CR-2i Full HD user manual Finevu Player You can play the recorded video in your FINEVu player on the PC as follows. Front camera video Product setting information and car Black box's speed operational voltage Acceleration sensor Recorded date/time value... -
Page 22: Settings
Settings Before configuring the settings, find out about the video range of each recording mode and the number of files to be saved in the memory. Memory management The start and end recording times differ for each recording mode, depending on the resolution of the video. Mode Time saved Folder name... -
Page 23: Memory Map
CR-2i Full HD user manual Memory map The maximum recording time and number of files for each recording mode are as follows: Emergency Memory size Category Normal recording Event recording Remarks recording Max. size 6.66GB 6.66GB 1.48GB Max. storage time... -
Page 24: Connecting The Black Box To A Pc
After booting is complete, the black box switches to USB mode and is executed as a removable disk. When you run CR-2i Full HD_Setting.exe, the CR-2i_Full- HD_Settings.exe setup is copied onto the desktop and then run. -
Page 25: Setup Program
CR-2i Full HD user manual Setup program Basic settings Recording mode This is the resolution for the video recording. Recording fps Set the recording frames per second during driving. Shock Sensitivity in Driving Mode Set the shock sensitivity during driving. - Page 26 Settings Advanced setting Video Quality Set the quality of recorded videos. Video Sharpness Set the sharpness of recoded videos. Nighttime Brightness Set the brightness of the video at night in low lighting conditions. Voice Recording Set whether to record voice. Vehicle Speed (GPS option) Set how the vehicle speed is shown by GPS.
- Page 27 CR-2i Full HD user manual User setting Video Rotation Set the orientation of video to be recorded according to the installation Security LED (Front) location. Specify whether to use the LED for the front camera. Video Out Format Select NTSC or PAL as the video output mode.
-
Page 28: Alarms And Formatting Sd Card
Alarms and formatting SD card Status alarms Status Alarm Status Alarm "Ding-Dong~ Video recording starts. " Reset time* "Beep~ Check the time setting. " Booting sound & "Beep, beep~"(rear camera not Start recording Format progress connected) "Beep, beep, beep" sound Emergency "Cha-Re-Rook"... -
Page 29: Formatting Sd Card
CR-2i Full HD user manual Formatting SD card Press the button until power is supplied and then After booting is complete, formatting proceeds with the hold it down for about 7 seconds. "Beep~ Beep~ Beep~" alarm. (The LED of the button is shown in yellow during formatting.) -
Page 30: Management
Management Firmware upgrade Download the latest firmware from the website. Unzip the downloaded firmware and copy it to the root directory of the memory card. Remove the Micro SDHC card from the black box and place it in the adapter. Use the memory card reader for connection with a PC. -
Page 31: Cleaning And Storage
CR-2i Full HD user manual Cleaning and storage Cleaning Storage • • If there is a foreign object on the lens, wipe it down with If you are not using the black box, remove it from your a soft cloth. -
Page 32: Troubleshooting
Troubleshooting The black box does not turn on. Booting is complete, but there is no sound. • Check if the power (cigarette jack cord) is connected. • On the Setup Program screen, check if the alarm volume is set to its lowest. •... - Page 33 CR-2i Full HD user manual The black box is recognized on the PC USB, but is No scenes are recorded in the video. disconnected. • Check if the black box booted properly. • Connect the black box to the USB port on the PC •...
-
Page 34: Specifications
Specifications Item Spec Remarks Model Name CR-2i Full HD Front: 67 x 50 x 41mm / 75g Size/weight cable/mounting bracket weights excluded. Rear: 50 x 50 x 28mm / 29g Memory capacity micro SDHC 16GB/32GB Class 10 or later recommended... -
Page 35: Installing And Using Finevu Player
Installing and using FineVu Player FineVu Player is the software that enables you to play a video recorded by the Fine Digital black box. Download FineVu Player from http://www.finevu.com and install it. Main screen When you install and then run FineVu Player, the following The main screen where a recorded video is played screen is displayed. - Page 36 Playing and checking recorded videos Recommended PC specifications for FineVu Player Click the Open button in the control bar. Minimum Recommended Windows XP SP3 Windows Vista, 7 Select a folder containing recorded videos. 30 MB 50 MB or more Intel Dual Core or later / Pentium4 3.0 GHz AMD AthlonX2 or later 128 MB...
-
Page 37: Limited Warranty
Limited Warranty This product is guaranteed against manufacturing defects for one (1) year (six (6) months for battery and accessories) from the original date of purchase. Finedigital’s sole obligation in the event of such defects during this period is to repair or replace the defective part or product with a comparable part or product at Finedigital’s sole discretion. - Page 38 www.FineVu.com...
Need help?
Do you have a question about the CR-2i Full HD and is the answer not in the manual?
Questions and answers