Installation - Neue Fridge Freezer User Manual

Problem
The temperature in the refrig-
erator is too high.
The temperature in the freezer
is too high.
There is too much frost.
Replacing the lamp
Caution! Disconnect the plug from the mains
socket.
1
2
1
Closing the door
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to "Installa-
tion".

Installation

Caution! Read the "Safety Information" carefully
for your safety and correct operation of the
appliance before installing the appliance.
Positioning
Install this appliance at a location where the ambient
temperature corresponds to the climate class indicated
on the rating plate of the appliance:
Possible cause
There is no cold air circulation in the
appliance.
Products are too near to each other.
Food is not wrapped correctly.
The door is not closed correctly.
The temperature regulator is not set
correctly.
1.
2.
3.
4.
5.
Make sure that there is cold air circula-
tion in the appliance.
Store products so that there is cold air
circulation.
Wrap the food correctly.
Refer to "Closing the door".
Set a higher temperature.
At the same time, with the fingers expand up and
down the transparent cover and unhook it in the direc-
tion of the arrows.
Replace the lamp with one of the same power and
shape, specifically designed for household applian-
ces. (the maximum power is shown on the light bulb
cover).
Reassemble the lamp cover.
Connect the plug to the mains socket.
Open the door. Make sure that the light comes on.
3. If necessary, replace the defective door gaskets.
Contact the Service Center.
Climate Ambient temperature
class
SN +10°C to + 32°C
N +16°C to + 32°C
ST +16°C to + 38°C
T +16°C to + 43°C
Solution
9