Additional Features - JVC TH-G30 Instructions Manual

Additional features

Time Search
DVD
To start playing at any chosen time on the disc:
1. Press DISPLAY during playback.
2. Press v / V to select the time clock icon and
"--:--:--" appears.
3. Input the required start time in hours, minutes, and
seconds from left to right. If you enter the wrong
numbers, press CLEAR to remove the numbers
you entered. Then input the correct numbers.
4. Press ENTER to confirm. Playback starts from the
selected time.
1.5 times speed playback
DVD VCD ACD
You can play at 1.5 times speed.
The 1.5 speed allows you to watch the pictures and
listen to the sound quicker than playing at a normal
speed on the disc.
1. During playback, press PLAY(B) to play at 1.5
times speed. "BX1.5" appears on the screen.
2. Press PLAY(B) again to exit.
Screen Saver
The screen saver appears when you leave the unit in
Stop mode for about five minutes.
Screen Saver, press any button and then operate the
unit.
Last Scene Memory
This receiver memorizes the last scene from the last
disc that is viewed. The last scene remains in the
memory even if you remove the disc from the receiver
or switch off the receiver. If you load a disc that has
the scene memorized, the scene is automatically
recalled.
Note:
This receiver does not memorize the scene of a disc if you
switch off the receiver before commencing to play the disc.
Mixed disc or USB Flash drive – MP3/WMA and
JPEG
When playing a disc or USB Flash drive contained with
MP3/WMA and JPEG files together, you can select
which menu of files you would like to play by pressing
TOP MENU.
16
MP3
WMA
To cancel the
DVD
System Select
You must select the an appropriate system mode for
your TV system. If NO DISC appears in the display
window, press and hold PAUSE/STEP (X) remote
control for more than 5 seconds to be able to select a
system (PAL, NTSC).
When the selected system is not compatible with
the system of your TV, normal colour picture may not
be displayed.
NTSC: Select when DVD/CD Receiver is connected
with NTSC-TV.
PAL: Select when DVD/CD Receiver is connected
with PAL-TV.
To adjust MIC Volume
Press MIC VOL.(-/+) on the remote control to increase
the volume, or MIC VOL.(-/+) to decrease it.
To adjust ECHO Volume
You can give an echo effect to the sound from the
microphones.
Press the ECHO VOL.(-/+) on the remote control to
increase the echo volume or decrease it.