Preparing The Remote Control; Attaching The Core Filter To The Usb Cable - JVC GZ-MG680 Instructions Manual

Preparing the Remote Control

A battery is included inside the remote control at the time of purchase.
Remove the insulation sheet before use.
Beam Effective Area
Remote Sensor
NOTE
The transmitted beam may not be effective
or may cause incorrect operation when the
remote sensor is directly exposed to sunlight
or powerful lighting.

Attaching the Core Filter to the USB Cable

The core fi lter reduces interference caused when connecting to other devices. Connect the end of
the cable with the core fi lter to the camcorder.
Release the stopper.
Effective distance:
Max. 5 m
3 cm
To be connected to
the camcorder
To Reinsert the Battery
Pull out the battery holder by pressing the lock
tab.
Lock Tab
Lithium Battery
(CR2025)
Wind once.
11
EN