Ford 2013 MUSTANG Owner's Manual page 251

250
Replacing Rear Sidemarker Lamp Bulbs
1. Make sure the headlamp switch is in the off position and locate the
sidemarker on the rear bumper fascia.
2. Insert a flathead screwdriver between the rear of the sidemarker lens
and the bumper fascia.
3. Push the screwdriver to the front of the vehicle and then slide it
towards you to pop out the lamp assembly.
Replacing License Plate Lamp Bulbs
1. Make sure the headlamp switch is in the off position.
2013 05+ Mustang (197)
Owners Guide gf, 3rd Printing
USA (fus)
Maintenance
4. Carefully pull the bulb straight
out of socket.
Install the new bulb in reverse
order.
2. Remove the 2 screws and the lens
from the license plate lamp assembly.
3. Carefully pull the bulb straight out
from the lamp assembly.
Install the new bulb(s) in reverse
order.