Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Service Manual
Advertisement
Table of Contents
Related Manuals for Haier HWM80-0566
Summary of Contents for Haier HWM80-0566
- Page 1 Full Automatic Washing Machine This manual is for HWM80-0566 Please read this manual carefully before using. Retain it for future reference.
-
Page 2: Table Of Contents
CONTENTS Names of the parts Safety precautions Installation and adjustment Install the water inlet hose Preparation before using in the laundries Usage of the detergent Close the top lid Use the operation buttons Finish washing Disposal after washing Trouble shooting answer to question Packing list specifcation... -
Page 3: Packing List
Packing list Name User's manual Component of the water inlet hose The end connecting to the washing machine Jointer connecting the water inlet hose and the water faucet The end connecting to the water inlet hose jointer Bottom cover (Inside the inner tub of washing machine) Topping screws Full automatic washing machine Specification... -
Page 4: Safety Precautions
Safety precautions The washing machine must be positioned Please plug the power plug on special so that the plug is accessible. Be sure to pull the receptacle. Be sure to use three-pins plug off and close the water faucet in power receptacle. -
Page 5: Disposal After Washing
Disposal after washing After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. The lint filter must be used during washing. Clean the detergent box and set it on It must be cleaned in time after each using. -
Page 6: Installation And Adjustment
Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Install the bottom plate After you open the package, please Back lean the washing machine gently down on soft items ( like the towel cloth, blanket, etc. - Page 7 Steps of using the operation buttons and description of the steps 1.Push "power" button to switch on the power 2.Push "program" button to select suitable full-auto program After the power is switched on, "standard" is automatically set. To select other full-auto program, please push the "program"...
-
Page 8: Install The Water Inlet Hose
Install the water inlet hose Confirm the water faucet Water faucet,suitable Outlet end surface It is required that the front end shall be longer than 10mm. The exit end face of the faucet shall be flat and smooth. If not please file it to avoid leakage. Connection between the water inlet hose jointer and the water faucet 1.Press the lower end of the lock lever and push down the slider. -
Page 9: Use The Operation Buttons
When water level 3 is reached, it will change to normal washing. Connection between the water inlet hose and the washer 1.Do not take off the water absorption cushion. Please check if the cushion is dropped or damaged before each usage. If it happens please contact our after-sale department immediately. -
Page 10: Put In The Laundries
For whitener in powder, dissolve it before use. 4. Close the top lid As the top lid opened, the washer will automatically given alarm and stop running, exclusively during draining The capacity of washing of the machine refer to the largest weight of the standard laundries under dry condition that can be washed in one time.
Need help?
Do you have a question about the HWM80-0566 and is the answer not in the manual?
Questions and answers