Replacing A Photoconductor Unit - Epson AcuLaser C3900 Series User Manual

Replacing a Photoconductor Unit

Type
Photoconductor Unit (Yellow)
Photoconductor Unit (Magenta)
Photoconductor Unit (Cyan)
Photoconductor Unit (Black)
Note:
Do not touch the OPC drum surface. This could lower image quality.
If P/U LOW on the SYS DEFAULT MENU/ENABLE WARNING is set to ON, the message P/U LOW X (where
"X". represents the color of the toner) appears when a photoconductor unit becomes near empty.
Follow the steps below to replace the photoconductor unit.
Note:
You are advised to replace the indicated photoconductor unit when the message P/U LIFE X appears.
1. Check the message window to see which color photoconductor unit needs replacing.
2. Open the printer's front cover.
AcuLaser C3900 Series
Parts Number
1201
1202
1203
1204
Replacing Consumables and Maintenance Parts
User's Guide (Abridged Version)
12