Haier HWM150-0623S User Manual page 11

Midway spinning
1.Put the laundries into the spin tub evenly and smoothly.
2.Spin
(1) Put the gland in properly.
Proper
(2) Close the inner and outer cover of the spin tub.
(3) Spin for 1-2 minutes.
3.Run the foam-removing spinning.
1 Set the fill selector handle on spin side and
fill water for about 1 min.
In case water flows out from wash tub side
due to too much inflow, please turn down
the water tap a bit.
2 Close the spin tub outer cover and spin
for about 1 - 2 min.
Please put in the gland properly even if the
laundries quantity is small.
Push
Gland
The laundries
are slanting
Push
Proper No gland
Outer cover of
The spin tub
Inner cover of
The spin tub
Fill selector handle
9
Water inlet
INLET SELECTOR
WASH SPIN