American Standard Antiquity 0224.014 Specification Sheet

ANTIQUITY™ PEDESTAL SINK
• Turn-of-the-century detailing on lavatory
and pedestal
• Made from vitreous china
• Rear overflow
• Supplied with mounting kit
• Faucet ledge with large deck area
(faucet not included)
• Design matched to Antiquity toilets
❏ 0228.080 Faucet holes on 8" (203mm) centers
(Illustrated)
❏
0224.040 Faucet holes on 4" (102mm) centers
Nominal Dimensions:
610 x 483 x 864mm
(24-1/2" x 19" x 34")
Separate Components:
❏
0228.018 Pedestal top-8" (203mm) centers
❏ 0224.014 Pedestal top-4" (102mm) centers
❏ 731007-400 Pedestal only
Bowl sizes:
483mm (19") wide
298mm (11-3/4") front to back
140mm (5-1/2") deep
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2M for Vitreous China Fixtures
To Be Specified:
❏ Color: ❏ White ❏ Bone ❏ Linen
❏ Faucet*:
❏ Faucet Finish:
❏ Supplies:
❏ 1-1/4" Trap:
* See faucet section for additional models available
© 2008 AS America Inc.
89mm
(3-1/2)
PEDESTAL ANCHORING
SCREW HOLES
8mm (5/16) DIA.
203mm
(8)
203mm
(8)
*
578mm
(22-3/4)
*
521mm
(20-1/2)
NOTES:
*
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND "P" TRAP ARE
SUGGESTED.
▼ PEDESTAL ANCHORING SCREWS NOT INCLUDED.
■ SUITABLE FOR REINFORCEMENT ONLY. ACTUAL DIMENSIONS MUST
BE TAKEN FROM FIXTURE.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
INSTALLATION INSTRUCTIONS SUPPLIED WITH LAVATORY.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
J12
ANTIQUITY™
PEDESTAL SINK
VITREOUS CHINA
FINISHED
203mm WALL
(8)
203mm
(8)
483mm
(19)
622mm
13mm
(24-1/2)
(1/2") DIA.
HOLES FOR
ANCHOR BOLTS
264mm
51mm
(10-3/8)
(2)
REF.
SUPPLIES AS
178mm
REQUIRED
(7)
1-1/4 O.D.
WASTE
864mm
(34)
1-1/4 O.D.
TAILPIECE
FINISHED
FLOOR
241mm
(9-1/2)
Revised 2/08 Revised
DRAIN
CHASE
356mm
(14)