Enroll & Erase Group Member's Fingerprint(S); Enroll Group Member's Fingerprint(S) - Q-See QSE7F4 User Manual

QSE7F4 USER MANUAL
2.6 Enroll & erase group member's fingerprint(s)
Fingerprint number & name list
G r o u p A
No.
Fingerprint Fingerprint
Name
1 0001 1001
2 0002 1002
3 0003 1003
4 0010 1010
5 0011 1011
6 0012 1012
7 0013 1013
8 0020 1020
9 0021 1021
10 0022 1022
11 0023 1023
12 0030 1030
13 0031 1031
14 0032 1032
15 0033 1033
16 0100 1100
17 0101 1101
18 0102 1102
19 0103 1103
20 0110 1110
21 0111 1111
22 0112 1112
23 0113 1113
24 0120 1120
25 0121 1121
26 0122 1122
27 0123 1123
28 0130 1130
29 0131 1131
30 0132 1132
ID For deleting Group A: ID For deleting Group B:
0000
12
G r o u p B G r o u p C G r o u p D
Fingerprint Fingerprint
Name Name Name
2001 3001
2002 3002
2003 3003
2010 3010
2011 3011
2012 3012
2013 3013
2020 3020
2021 3021
2022 3022
2023 3023
2030 3030
2031 3031
2032 3032
2033 3033
2100 3100
2101 3101
2102 3102
2103 3103
2110 3110
2111 3111
2112 3112
2113 3113
2120 3120
2121 3121
2122 3122
2123 3123
2130 3130
2131 3131
2132 3132
ID For deleting Group C: ID For deleting Group D:
1000 2000 3000
QSE7F4 USER MANUAL
Referring to the list, let's take the member in Group A, Fingerprint No. 0001
for example.

2.6.1 Enroll group member's fingerprint(s)

1.Place Master finger on the sensor, the lock will be activated once the infrared
detector detects the finger. The blue background lights, green indicator light
and red light on sensor flashes; Or press "0", the blue background green
indicator light and red light on sensor flashes, place the Master finger on the
sensor .(Figure2-6)
2-6
NOTE: A. If the infrared detector doesn't work, you can press "0" to activate
the lock.
B. After the red light on sensor flashes, you must put the Master finger on the
sensor within 5 seconds. Otherwise, the red indicator flashes, followed by 2
short beeps to indicate the failed operation.
2.All indicators go out, a long beep is heard, move away the Master finger, the
green and red indicators flash (NOTE: the flash will last about 6 seconds, step 3
must be done within 6 seconds)
3.Press "1", a long beep is heard, red indicator goes out, green indicator lights.
(Figure2-7)
13