Metview Console Display Options; Table 5 Metview Scale And Unit Options; Table 6 Metview Averaging Options; Table 7 Max/Min Markers - Gill Instruments MetPak RG 1723-3B-2-111 User Manual

Contents
3.2.4
Last Change
12 February, 2013

MetView Console Display Options

MetView Console buttons can convert data from the MetPak RG to read different
units or scale settings. This does not alter the actual MetPak RG configuration.
Units shown in bold denote default settings
Table 5 MetView scale and unit options
Gauge
Wind Direction
Wind Speed
Markers
Wind Speed
Pressure
Humidity
Temperature &
Dew Point
DIG1
Table 6 MetView averaging options
Setting
Real Time
2 Min
10Min
Table 7 Max/min markers
Setting
Off
On
Reset
Table 8 MetView Screen Settings Options
Setting
Save Settings
Load Settings
Default Settings
MetPak RG User Manual
©
Gill Instruments Ltd
Use buttons to choose from two display styles: NSEW or
Maritime
Use buttons to add markers on the gauge for Max/Min
or Max Gust.
Use buttons to choose from five wind speed units: m/s,
kph, mph, kts, fpm
Use buttons to choose from pressure scales: hPa, mbar,
inHg, mmHg
Displays Max and Min values during current session in
%
Use buttons to choose from three temperature scales:
°C, °F, K
Typically for Rain, buttons available for inches or
millimetres and a reset button.
Choose this button for no averaging
Select for 2 minute rolling average of all sensor readings
except DIG1
Select for 10 minute rolling average of all sensor
readings except DIG1
Maximum and Minimum Markers on all gauges turned
off
Maximum and Minimum Markers on all gauges turned
on
Reset all Gauge Maximum/Minimum Markers and all
digital Maximum/Minimum reading at will
Will Save all the current MetView screen settings to a file
for later retrieval if required.
Will load and update the MetView screen with a
previously saved setting.
Will return all MetView screen settings to factory default.
Function
Function
Function
Function
Page 25