Metview Console Display Options; Table 5 Metview Scale And Unit Options; Table 6 Metview Averaging Options; Table 7 Max/Min Markers - Gill Instruments 1723-1A Series User Manual

3.2.4
Last Change
22 April, 2013

MetView Console Display Options

MetView Console buttons can convert data from the MetPak Base Station to read
different units or scale settings. This does not alter the actual MetPak Base Station
configuration.
Units shown in bold denote default settings
Table 5 MetView scale and unit options
Gauge
Wind Direction
Wind Speed
Markers
Wind Speed
Pressure
Humidity
Temperature &
Dew Point
Table 6 MetView averaging options
Setting
Real Time
2 Min
10Min
Table 7 Max/min markers
Setting
Off
On
Reset
Table 8 MetView Screen Settings Options
Setting
Save Settings
Load Settings
Default Settings
MetPak Base Station User Manual
©
Gill Instruments Ltd
Use buttons to choose from two display styles: NSEW or
Maritime
Use buttons to add markers on the gauge for Max/Min or
Max Gust.
Use buttons to choose from five wind speed units: m/s,
kph, mph, kts, fpm
Use buttons to choose from pressure scales: hPa, mbar,
inHg, mmHg
Displays Max and Min values during current session in %
Use buttons to choose from three temperature scales: °C,
°F, K
Choose this button for no averaging
Select for 2 minute rolling average of all sensor readings
except DIG1
Select for 10 minute rolling average of all sensor readings
except DIG1
Maximum and Minimum Markers on all gauges turned off
Maximum and Minimum Markers on all gauges turned on
Reset all Gauge Maximum/Minimum Markers and all
digital Maximum/Minimum reading at will
Will Save all the current MetView screen settings to a file
for later retrieval if required.
Will load and update the MetView screen with a previously
saved setting.
Will return all MetView screen settings to factory default.
Function
Function
Function
Function
Operation
Page 29