Peavey AAM 802 Specifications

Compact two-bus mixers

Hide thumbs Also See for AAM 802:

Download this manual See also: User Manual

The AAM 802 and 1602 mixers are new compact two bus mixers from Architectural Acoustics.

These mixers are perfect for the small to medium sound reinforcement jobs. Both mixers use a new

"studio quality" microphone preamp developed by Peavey Electronics. These mixers have been built

exclusively for the contracting industry and feature all input and output connections on the rear of

the unit, perfect for permanent installations. These mixers are also part of a complete new family of

products from AA, engineered to complement each other.

Features:

• Eight or 16 microphone inputs complete with XLR connectors

• Three band EQ on 1 thru 6, 1 thru 14 with mid sweep

• Three band fixed EQ on 7 thru 8, 15 thru 16

• Two pre and post EQ sends

• Inserts on 1 thru 4, 1 thru 8

• Pad and polarity on 7 thru 8, 15 thru 16

• Mute and PFL on each input

• LED clip, signal, PFL and mute indicated

• Two stereo effects returns

• Precision 60 mm faders on input channels

• Left, right, monitor 1 and 2 and mono out with balanced XLR connectors

• Rugged console design, rack mount included with AAM 802

• 48 V phantom power

• Separate tape in and out

AAM

802

™

AAM 1602

Compact two-bus mixers

Page 1 AAM 1602 Compact two-bus mixers The AAM 802 and 1602 mixers are new compact two bus mixers from Architectural Acoustics. These mixers are perfect for the small to medium sound reinforcement jobs. Both mixers use a new “studio quality” microphone preamp developed by Peavey Electronics. These mixers have been built exclusively for the contracting industry and feature all input and output connections on the rear of the unit, perfect for permanent installations.
Page 2: Specifications
AAM 802/1602 COMPACT CONSOLE Specifications: Input Specifications: Function Input Z Input Gain Input Levels Bal/ Connector (ohms) Settings Min** Nominal* UnBal. Microphone 2.2 k Max. Gain -74 dBu -54 dBu -37 dBu Bal. XLR: Pin 1 Gnd, (150 ohms) (58 dB) Pin 2 (+), Min.
Page 3: Output Specifications
Output Specifications: Function Minimum Output Level Bal/ Connector Load UnBal. Ohms Min** Main L/R +4 dBu +22 dBu Bal. 1/4" TRS: Tip (+), Ring (-) Sleeve Ground +4 dBu +22 dBu Bal. XLR: Pin 1 Ground Pin 2 (+), Pin 3 (-), (Bal.) Monitors +4 dBu +22 dBu...
Page 4 12 segment, peak reading (0 dB = +4 dBu) Features and specifications subject to change without notice. Peavey Electronics Corporation • 711 A Street • Meridian • MS • 39301 (601) 483-5376 • FAX (601) 486-1678 • http://aa.peavey.com ©2001 Printed in the U.S.A. 02/01...