Control Panel And Functions - Leslie 2121 Owner's Manual

CONTROL PANEL AND FUNCTIONS

6
POWER
ON
1
OFF
(REMOTE)
2
AC IN
1
ON/OFF POWER SWITCH
Use this switch to turn the unit "ON" or "OFF." To turn the unit "ON," simply press this
switch in at the top. To turn the unit "OFF," press the switch at the bottom.
2
AC IN
Use this receptacle to connect the A.C. Power Cord provided with your unit. Locate the A.C.
Power Cord and plug the female end into the A.C. Power receptacle, and the male end into
your A.C. power outlet.
3
GAIN Switch
Use this switch to adjust the impedence of the signal coming in from the INPUT 1 jack. Use
the MIC position when conecting a microphone and the LINE position for connecting an
external sound device such as a keyboard, synthesizer, etc.
4
INPUT 1 Volume Control
This Rotary Control adjusts the level of the signal from the INPUT 1 jack.
5
PHANTOM Switch
If you are plugging an XLR-type plug into the INPUT 1 jack, set this switch to the "ON"
position in order to supply a 24-volt phantom power source required by an XLR plug. For all
other conections, set this switch to the "OFF" position.
6
INPUT 1 Jack
Use this jack to connect to an external sound device. The jack will accept either an XLR
(low-impedence) or a PHONE (1/4" high-impedence) connection.
7
INSERT Jack
Use this jack to connect a signal processor.
NOTE: Be sure to use a Stereo "Y" cable, as the #2121/2122/2123 uses the "ring" to SEND the
signal and the "tip" to RETURN the processed signal.
Leslie 2121/2122/2123 Owner's Manual
21
Stationary-Unit
INPUT 1
VOLUME INSERT
4
7
3
GAIN
LINE MIC 0 10
TIP: RETURN
5 6
XLR: Lo-Z R I N G : S E N D
PHANTOM
P H O N E : H i - Z
(XLR ONLY)
OFF ON
PUSH
INPUT 2 INPUT 3
VOLUME VOLUME BASS
a
8
:
0 10 0 10 -10
!
LINE LINE
9
REMOTE
%
FROM
Leslie #2101/2102
ONLY
TONE MASTER
TREBLE VOLUME
#
$
+10 -10 +10 0 10
& (
LINE OUT
+5 -5
POWER
ON
TW. LEVEL
b