Use Gps With Map Software - Motorola i9 Mike User Manual

Hide thumbs Also See for i9 Mike:
Table of Contents

Advertisement

Transmitters Off turns off your phone's calling
features in situations where wireless phone
use is prohibited, but you can use the phone's
other non-calling features when Transmitters
is turned Off.
u
Find it: / >
> Advanced > Transmitters > Off.
use GPS with map
software
Your phone is enabled with a highly-capable
GPS receiver that sends location information
to a USB port on a PC, laptop, or PDA.
Note: No serial port connectivity is provided
by your phone. Applications on the host
device which are expecting to receive the
GPS location information via a serial port must
instead use a Virtual Serial Comm Port.
The data sent to the host device is formatted
as prescribed in the National Marine
88
basics
Electronics Association 0183 V3.0 (NMEA-
0183) standard. As such it supports the
following sentences: GGA, GLL, GSA, GSV,
RMC, and VTG.
This handset is not a full NMEA-0183
compliant device supporting electrical RS-422/
RS-232 connectivity as dictated by the NMEA-
0183 standard. Consequently it's unsuitable
for conventional marine NMEA-0183
equipment use. Its intended use is for normal
"terrestrial" mobile users who want to enable
their USB hosting computing devices such as
a PC, laptop or PDA with the phone's highly-
capable GPS functionality.
get connected
1 Slide open the phone's bottom
connector and insert a micro-USB cable
into the phone's bottom connector.
2 Insert the other end of the micro-USB
cable into a vacant USB receptacle of your

Advertisement

Table of Contents
loading

This manual is also suitable for:

Telus i9 mike

Table of Contents