How Do I Operate The Humidifier; How Do I Use The Humidity Control; What Should My Humidity Setpoint Be; What Is A Frost Setting - Honeywell TrueEASE HE100 Owner's Operating Manual

How do I operate the humidifier?

Once the humidifier is installed and running, operation is automatic. Use the humidity control provided to make
any changes to the setpoint.
If you have questions about how to operate the humidifier, ask your installer.
•

How do I use the humidity control?

the home is lower than the humidity control's setpoint,
the control will call for humidity. Some controls will also
monitor outdoor conditions to ensure indoor humidity
does not condense on windows and walls.
•

What should my humidity setpoint be?

air temperature affects how much humidity can be
retained by the air in your home. Use this table as a
starting point. Then adjust the humidity control to your
own comfort or until condensation appears on the
windows, at which point you should lower the setpoint.
•

What is a frost setting?

a Window Frost Protection feature that limits humidity output based on outdoor conditions. For example,
on colder days, the air in your home can hold less humidity. The humidity control automatically lowers the
humidity setpoint accordingly, to prevent frost from appearing on the inside of your windows.
Lower the frost setting by one value each morning that you see frost or condensation on windows. Allow 24
hours for the new setting to take effect before re-adjusting. Once you have this set to a comfortable level
without condensation, you will not need to adjust further. You can adjust your humidity setpoint without
worrying about condensation.
Manual humidity controls (such as the H8908) do not have built-in frost settings. They require you to adjust
the humidity setpoint when the outdoor temperature changes. Use higher humidity setpoints when the
temperature is warmer, and lower setpoints when the temperature is cooler.
Humidifier 69-2414EF—01
When humidity in
The outdoor
Some humidity controls (such as Prestige, VisionPRO IAQ, and TrueIAQ) contain
Outdoor
Temperature
-20 F (-29 C)
° °
-10 F (-2-3 C)
° °
0 F (-18 C)
° °
10 F (-12 C)
° °
20 F (-7 C)
° °
>20 F (-1 C)
° °
Recommended Relative
Humidity Setting
15%
20%
25%
30%
35%
35%
M27982
9