Advertisement
Quick Links
WELCOME
To the comfortable world of humidified air. When you use
your Honeywell humidifier, you notice that your skin is not
as dry, and that your scratchy throat and irritated nasal
passages that aggravate allergies and asthma are
steadily improving.
You have also taken the first step in reducing the zapping
you create when you walk on your carpet and then touch
your TV, computer, metal door knob or your pet. Your
furniture and woodwork are also benefitting from the
difference that humidified air makes.
Congratulations! You have just made a great investment
in improving the comfort of your home.
APPLICATION
This installation kit contains all the parts necessary to
install your new Honeywell HE120 or HE160 Humidifier.
® U.S. Registered Trademark
Copyright © 2001 Honeywell •
HE120, HE160 Humidifier
•All Rights Reserved
Installation Kit
INSTALLATION INSTRUCTIONS
INSTALLATION
Preparing for the Installation
Be sure to identify all the required (Table 1) accessories
(included) and make sure the appropriate tools are
available before beginning the installation.
Required Accessories (Included)
Table 1. Required Accessories.
Quantity
6 ft (1.85M)
Bypass ducting including:
6 in. (155 mm) diameter flexible duct
Starter collar
Summer shut-off damper
Duct tape
20 ft (6.2m)
18 gauge, two-strand thermostat wire
20 ft (6.2m)
1/4 in. (6.35 mm) OD feed water tubing
10 ft (3.1m)
3/8 in (9.5 mm) ID overflow tubing
1 bag
Connecting and mounting hardware:
Wire nuts (4)
No. 8 sheet metal screws (18)
Overflow tube clamps (2 sizes)
Feed tube mounting clamps (6)
Brass inserts (2)
Plastic compression rings (2)
1
Plug-in transformer
1
Overflow fitting
1
Plastic compression nut
Required Tools
Tools required for installation include:
• Tin snip.
• Screwdriver.
• Adjustable or open-end wrench.
• Drill, punch or awl.
• Level.
Accessory
69- 1571
Advertisement
Related Manuals for Honeywell HE160
Summary of Contents for Honeywell HE160
- Page 1 WELCOME To the comfortable world of humidified air. When you use your Honeywell humidifier, you notice that your skin is not as dry, and that your scratchy throat and irritated nasal passages that aggravate allergies and asthma are steadily improving.
- Page 2 See Fig. 4 or NOTE: Sidecaps are interchangeable for either left or right bypass installation. See device installation instructions. NOTE: For HE120, go to step 7. For HE160, go to step ALTERNATE LOCATION RETURN 15 in. (381 mm)
-
Page 3: Connecting Plumbing
NOTE: For HE120, go to Connecting Plumbing section. For HE160, go to step 13. 13. Hold the hanger bracket against the duct/plenum so the bottom of the hanger bracket is about 1/2 in. - Page 4 NOTE: For HE120, use plastic compression nut for float connection. a. Place compression nut over tubing. NOTE: For HE160, use brass expander insert for float connection. b. Install brass insert into end of tubing. NOTE: A compression ring is required only at the tub end connected to the saddle valve.
- Page 5 WATER Fig. 8. Adjusting HE160 water level. INSTALLING BYPASS 1. Use inside of the 6 in. (155 mm) starter collar as a template to mark the opening for the bypass. 2. Carefully cut the 6 in. (155 mm) opening for the starter collar.
-
Page 6: Installing Humidistat
After installation use the following steps to check the humidifier operation: 1. Turn on the power and the water supply. NOTE: For HE160, see Adjusting Water Level section. 2. Verify that basin fills and float shuts off before 3. Turn the H8908 Humidity Control to On. -
Page 7: Troubleshooting Your Humidifier (Table 2)
Remove cover and verify that float is moving freely. Seal with duct tape. Level device. Check for free movement of float arm. Adjust water level of float. HE120, HE160 HUMIDIFIER INSTALLATION KIT What to do 69-1571... - Page 8 HE120, HE160 HUMIDIFIER INSTALLATION KIT Home and Building Control Home and Building Control Honeywell Honeywell Limited-Honeywell Limitée 1985 Douglas Drive North 35 Dynamic Drive Golden Valley, MN 55422 Scarborough, Ontario M1V 4Z9 69-1571 G.H. 09-01 Printed in U.S.A. on recycled paper containing at least 10% post-consumer paper fibers.