STEP 3
Speaker Connections
1. Connect the positive terminal from the speaker to the right channel positive terminal of the MPA 2250.
2. Connect the negative terminal from the speaker to the left channel positive terminal of the MPA 2250.
STEP 4
Remote Trigger Connections
1. Connect one end of the 1/8"-to-1/8" mono mini cable to the remote output of your receiver/preamp
(or MPA 3250). Should your receiver not have a remote trigger out, the 12V power transformer
can be plugged into the switched AC outlet on the back of your receiver.
2. Connect the other end of the 1/8"-to-1/8" mono mini cable to the remote trigger in of the MPA 2250.
If you are using the 12V power transformer, connect the end with the 1/8" mono mini jack to the
remote trigger in of the MPA 2250.
3. Connect one end of the 1/8"-to-1/8" mono mini cable to the remote output of the MPA 2250.
Connect the other end to the remote trigger in of the other MPA 2250. See MPA 2250 Connections for
more information.
23