Monster Power MPA 2250 Owner's Manual page 10

RACK MOUNTING
Your new Monster power amplifier comes with front and rear rack mounting for installing in equipment
racks. The front rack ears are separate from the unit and must be installed prior to rack mounting.
Please follow these instructions to mount your monster amplifier into a rack.
1. Remove the 10 Allen screws that secure the outer trim plates of the amplifier and set them
aside. Take care when removing to not scratch the rack ears or face plate.
2. Attach the rack ears by placing them along side each side of the amplifier. There is a small
metal strip on the back of each rack ear that should be flush with the side of the amplifier.
6