Table of Contents
Advertisement
Vax V-041P User Guide.qxd
www.vax.co.uk
Fig.7/3
Replacing the Belt or Brushbar
Slide the belt on to the motorshaft (Fig.7/4).
Fig.7/4
Place the new belt in the area of the brushbar without
bristles (Fig.7/5).
Fig.7/5
With the new belt in place, pull and slide the brushbar into
the nozzle, making sure that the end caps are in the
correct orientation (Fig.7/6a). Rotate the brushbar
manually to make sure the belt is properly aligned (Fig.7/6).
10
rotating brushbar removal and replacement
16/4/07
14:27
Page 10
Fig.7/6
Re-attach the nozzle guard (Fig.7/7).
Fig.7/7
Secure by aligning the three (3) tabs in the base slots
(Fig.7/8).
Fig.7/8
Replace all three (3) screws to secure the nozzle guard.
Refer to Fig.7/1 for screw positions.
a
Advertisement
Table of Contents
