Table of Contents
Advertisement
MX 8x8 DVI Pro
User's Manual
EDID Management
MX 8x8 DVI Pro provides an EDID Management feature with advanced functions
that helps system integration. The built in EDID Router stores and emulates 100
EDID data plus all monitor's EDID that are connected to the output connectors.
First 50 EDID are factory presets, while memories 50 to 99 are user
programmable.
On all inputs there can be emulated different or same EDID, that are copied from
EDID router's memory, or the attached monitor. For example, the router can be set
up to emulate any device, that is connected to one of the inputs, and the EDID is
automatically changed, if the monitor is replaced with an other.
EDID is independently programmable for all inputs without affecting each other. All
input has it's own EDID circuit.
User must not disconnect DVI cables during change an EDID opposite to other
manufacturer's products.
EDID Router can be controlled with included Matrix Control Software via RS232
port or Ethernet .
Page 13 / 53
Advertisement
Table of Contents
