Signal Reception Troubleshooting
Check the following points whenever you experience problems with signal
reception.
Problem
Cannot perform
manual receive.
Auto receive is
turned on, but
the Level 3
signal indicator
does not
appear on the
display.
Probable Cause
• The watch is not in the Receive
Mode.
• Your current Home City is not
one of the following: LON, PAR,
BER, ATH, HKG, TPE, TYO,
LAX, DEN, CHI, or NYC
• You changed the time setting
manually.
• The DST setting was changed
manually in the World Time
Mode.
• You pressed a button while signal
receive was in progress.
What you should do
• Enter the Receive Mode
and try again.
• Select LON, PAR, BER,
ATH, HKG, TPE, TYO,
LAX, DEN, CHI, or
NYC as your Home City
(page E-13).
• Perform manual signal
receive or wait until the
next auto signal receive
operation is performed.
E-31