Settings & Preferences; How To Use Preferences; Overview Of Preferences - Escort Passportmax Owner's Manual

Settings & Preferences

How to use Preferences

To access Preferences, press and hold both the MRK
and SEN buttons. PASSPORT Max will display
"Preferences," indicating it is in program mode.
Once the unit is in Preferences mode, the MRK button
is used to review the preference categories, and
+ −
the VOLUME AND buttons are used to change
the individual settings within the selected option.
To exit Preferences, simply wait a few seconds
without pressing a button. The unit will display
"Completed" and return to normal operation.
Example:
Here's how you would turn the AutoMute feature off:
1 Enter Preferences by pressing and holding both the
MRK and SEN buttons. PASSPORT Max will display
"Preferences."
2 Press the MRK button to scroll through the
categories to "AutoMute."
3 Since the factory setting is for AutoMute to be on,
PASSPORT Max will show AutoMute as ON.
+ −
4 Press the VOLUME
or
ON to OFF.
5 To complete this change, simply wait a few seconds
without pressing a button. The unit will display
"Completed" to confirm your selection.
NOTE: You can only access and customize the AutoMute
feature while in the Advanced user mode. See Overview
of Preferences below for details on how to switch user
modes.
button to change from

Overview of Preferences

Press and hold the MRK and SEN buttons to access
Preferences. To exit Preferences, simply wait a few
seconds without pressing a button. The unit will
display Completed to confirm your selections.
NOTE: AutoPower works only with constant-power
ignitions.
NOTE: When AutoPower is ON, the display will go
dark after the vehicle has been sitting still for 30
minutes, to save screen life. The screen will turn back on
automatically once your vehicle reaches a speed of 10
mph.
To restore PASSPORT Max to its original factory
settings, press and hold the SEN and BRT buttons
while powering on the detector. A "Restored"
message will display, acknowledging the reset.
To view your device's serial number and software
version, press and hold the MRK and MUTE buttons
while powering on the detector.