Table of Contents 2 - Introduction 3 - Know Your Electric Bike 4 - Range and Performance 5 - Safety 7 - Dash 8 - VPAC and Torque Sensor Explaination 9 - Battery Life 9 - Car Racks 9 - Rear Carrier 9 - Cleaning 10 - Removing the Battery 10 - Charging the Battery...
8-hours are complete. Subsequent charges will be complete If you have purchased an e-Moto automatically, when the light turns to electric bicycle that has not been green. assembled, please consult the specific assembly guide for your model, listed at http://www.emotoev.com.
All e-Moto electric assist bicycles use 9. Fenders chargers that automatically adjust 10. Torque Sensor for voltage between 110v - 240v 11. Shimano Derailleur AC. If you travel with your e-Moto bike, your charger will work with any country’s wall current.
Get your bike a regular (every • Proper Gear Usage: Taking full 12-months) tune up at your advantage of the available gears authorized e-Moto dealer. will significantly increase range. • Poor Maintenance: Under inflated tires, misadjusted brakes, a dry or dirty chain, can decrease...
Keep the charger away from periods during charging. other than e-Moto brand. water. Burning of the skin may result, as external temperature of the harger during harging...
Overheating, fire or electric shock may result. result. For the performance, safety and enjoyment of your e-Moto power assist bicycle, it is critical that you completely understand the operation of your electric bicycle. Even the most experienced cyclist needs to carefully review these passages.
10-mph, after which center for repair. the bicycle relies on human power. • If storing your e-Moto bicycle, be Pressing the Mode button until the sure to turn off the system at the “Hi” light is illuminated provides battery.
Explaination and operation of the VPAC power assistance: The brains of the e-Moto electric bicycle is the VPAC controller and torque sensor. It is a critical component to the long range and excellent performance of the e-Moto bike. How it works:...
Car Racks: a non-toxic cleaner. When transporting your e-Moto Avoid using high-pressure water electric bicycle, it is essential that you or compressed air to clean your use an approved rack. The bicycle e-Moto electric bicycle. These can must be supported from the wheels,...
Removing the Battery: Unlock the battery using the battery key, in the top keyhole of the battery bracket. Next, tilt the battery toward you until it clears the upper battery bracket. Finally, lift the battery up and out of the cradle. Reinstallation is the reverse of removal.
Written Warranty Last Revised June 2009 Thank you for your purchase of an No authorized e-Moto, LLC dealer, electric bicycle. e-Moto and our agent, or employee is authorized to dealers are committed to ensuring extend or enlarge this warranty on your satisfaction with your new behalf of e-Moto, LLC.
The sales e-Moto, LLC warrants registration card must be completed that, under normal use and mailed to e-Moto, LLC within and maintenance, each one (1) week of delivery of the new vehicle will be free vehicle to the original purchaser.
All parts replaced (5) Any repairs or replacements under warranty immediately become required as a result of accident or the property of e-Moto, LLC and, if collision. requested, must be returned at the (6) Any repairs or replacement customer’s or dealer’s expense. The...
(10) Any repairs or replacements Warranty Claim Instructions required as a result of the vehicle not having received, during To submit a claim to e-Moto, LLC the warranty term, the service for warranty approval, you must inspections prescribed in the first completely fill out the warranty e-Moto Owner’s Manual.
Thank you for your purchase of an e-Moto Power Assist Bicycle. Our goal is 100% customer satisfaction. If you have any questions or issues with your new electric bike-- or if there is anything we can do to improve your ownership experience, please to do not hesitate to contact e-Moto.