Configure The Pc Hardware; Connect An Fm Antenna To Your Pc - Hantarex 40" User Manual

Lcd 40" tv integrated wmc edition
Table of Contents

Advertisement

Available languages

Available languages

EN

Configure the PC hardware

Media Center's Standard configuration is similar to a traditional PC. The only additional steps are
connecting a TV signal and the sensor. Refer to the manufacturer's manual to configure the PC
hardware.
The following section show only the additional Media Center PC connections,
specifically that of the TV signal (from Co-axial or S-Video), the sensor (if external, therefore USB)
and the IR controller (3,175 mm, 1/8" mini-jack). The PC manufacturer can provide the additional
instructions and more precise hardware configuration.

Connect an FM antenna to your PC

To use your FM tuner on the PC board, it is necessary to connect it to an antenna. FM antennas are
available in many shapes and sizes.
Two examples are show below.
Find the FM jack on the PC's TV tuner and connect the antenna. As in all cases, you might have to
adjust the FM antenna's position for the best reception.
___________________________________________________________________________
7
.1
WMC MANUAL rev 1.0

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lcd 40" tv integrated wmc edition

Table of Contents