Power Monitoring And Charging The Batteries; Screen Lock; Connecting With Computer And Data Transfer - Visture V4 User Manual

Visture Ltd all rights reserve

Power monitoring and charging the batteries

The battery charge symbol in on the status bar indicates
the charging status of the batteries.
If the power goes down to empty, the device shuts off automatically.
If power is empty, use the power adapter to charge the device.
The charging time for the battery is approximately 6~8 hours.

Screen lock

If the device is not used for specified time or press the 'Power'
button briefly, the screen will switch off and display lock is activated.
By short pressing the 'Power' button the screen will be reactivated.
For unlocking the screen press the 'Lock' button toward the unlock
direction.
Connecting to the computer and data transfer
V4 is equipped with a High-Speed USB2.0 Interface.
After you connect the device to a computer, it appears in
the status bar display
.
Pull the status bar down and press 'USB Connection' to activate
the USB Memory. When using the device for data transfer,
you cannot access the Micro SD/TF Card from V4!
www.visture.com
‐ 7 ‐