Function; Video Menu Options; Adjusting Video; Picture Mode - LG AH215 Owner's Manual

Function

* In this manual, the OSD(On Screen Display) may be different from your Projector's because it is just an example to
help with the Projector operation.
* This operating guide explains operation of RGB(PC) mode mainly.

Video Menu Options

Adjusting Video

1. Press the MENU button and then use
2. Press the button to select a video item you want to adjust.
,
3. Press the button to adjust the screen condition as you want.
,
G Each adjustment of
As required, re-adjust
G To restore the original image condition after changing it, press
after selecting [Reset] item. (For RGB and HDMI signals only)
G When receiving an NTSC signal, the picture item Tint is displayed and can
be adjusted.(60Hz only)
G You can adjust contrast by pressing the
G You can adjust brightness by pressing the
G Press the MENU button twice or the EXIT button to exit the menu screen.

Picture mode

* Use Picture mode to set the projector for the best picture appearance.
* This function will not work at the RGB and HDMI modes.
1. Press the MODE button of remote control.
2. Press the button to adjust the screen condition as you want.
,
G Each press of the
,
Clear
G You can use this function through the MENU button.
G To exit the menu display, press the EXIT button.
button to select the
,
menu options will not affect other inputs.
menu options for the input sources.
button on the remote control.
button on the remote control.
button changes the screen as shown below.
Soft
menu.
Contrast
Brightness
Color R
Color G
Color B
Reset
MENU
OK button
Picture mode
Contrast
Brightness
Color
Sharpness
Tint
MENU
User
Function
< RGB mode >
50
50
50
50
50
Exit Move OK
< Video mode >
Clear
80
50
50
50
0
Exit Move OK
19