Electrolux EI30BM60MSA Installation Instructions Manual page 8

Installation Instructions
ALIGNING THE WALL PLATE
Hole B
REAR WALL
Centerline
notches
"a
Draw a Vertica! Line
on Wall from Center
of Top Cabinet
Horizontal Line
CAUTION:
Wear gloves
to avoid cutting fingers on
sharp edges.
Area E
u
u
u
u
' Hole A Horizontal Line
!
Draw a Horizontal line on wall from
bottom of "Rear Wall Template".
I_ Draw a Vertical line on the wall at the center of the
30" wide space.
I_ Draw a Horizontal line on the wall at the bottom of
"Rear Wall Template".
I_ Drill 5/8" holes for toggle bolts on 2 locations
(Hole A, Hole B) but if the location of hole
is same as that of stud, drill a 3/16" hole for wood
screw. In other words, toggle bolt can not be used
to the location of stud.
NOTE: DO NOT MOUNT THE PLATE AT THIS
TIME.
NOTE: Holes A and B are inside area E. If both of
A and B are not in a stud, find a stud somewhere in area
E and draw a forth circle to line up with the stud. It is
important to use at least one wood screw mounted
firmly in a stud to support the weight of the
microwave. Set the mounting plate aside.
8