Crisper And Crisper Cover - Haier HBE18 User Manual

English
To install utility drawer cover shelf: (see fig.#11)
1. Guide the rear shelf hooks into the desired slots in the metal shelf sup-
ports located on the back refrigerator wall.
2. Tilt up front of the shelf to set the shelf hooks in place.
3. Lower the front of the shelf into position until the rear hooks lock into
the slots of the metal shelf supports.

Crisper and Crisper Cover

To remove and install the crisper: (see fig.#12)
1. Slide crisper straight out to the stop.
2. Gently lift the front of the crisper.
3. Grip the crisper firmly and slide out completely.
4. Replace the crisper by placing the crisper properly in its tracks and
gently sliding it back into place.
15
fig. # 11
fig. # 12