Battery Installation - JetBeam PC20 User Manual

Operation Instructions:

Battery installation

1. Unscrew the tailcap in counter-clockwise
direction.
2. Insert two CR123/RCR123 batteries with the
positive pole of the battery pointing to the
light head.
3. Screw the tailcap back on the flashlight
tightly.Tactical lighting/Momentary mode
Lightly press the button at the tailcap. The
flashlight is turned on; Release the button at
the tailcap. The flashlight is turned off.
WARNING
Insert batteries with the positive (+) end pointing
to the head. The PC20 will not work when
incorrectly insert the batteries.